介电常数测试仪及介质损耗测试仪

       北京艾诺德仪器有限公司，致力于打造中国仪器航母品牌。

介电常数测试仪及介质损耗测试仪

GCSTD-A
  满足标准：GBT 1409-2006测量电气绝缘材料在工频、音频、高频（包括米波波长在内）下电容率和介质损耗因数的*方法
一、 概述
介质损耗和介电常数是各种电瓷、装置瓷、电容器等陶瓷，还有复合材料等的一项重要的物理性质，通过测定介质损耗角正切tanδ及介电常数（ε），可进一步了解影响介质损耗和介电常数的各种因素，为提高材料的性能提供依据；仪器的基本原理是采用高频谐振法，并提供了，通用、多用途、多量程的阻抗测试。它以单片计算机作为仪器的控制，测量核心采用了频率数字锁定，标准频率测试点自动设定，谐振点自动搜索，Q值量程自动转换，数值显示等新技术，改进了调谐回路，使得调谐测试回路的残余电感减至zui低，并保留了原Q表中自动稳幅等技术，使得新仪器在使用时更为方便，测量值更为精确。仪器能在较高的测试频率条件下，测量高频电感或谐振回路的Q值，电感器的电感量和分布电容量，电容器的电容量和损耗角正切值，电工材料的高频介质损耗，高频回路有效并联及串联电阻，传输线的特性阻抗等。
该仪器用于科研机关、学校、工厂等单位对无机非金属新材料性能的应用研究。
二、 仪器的技术指标
   1．Q值测量
   a．Q值测量范围：2～1023。
   b．Q值量程分档：30、100、300、1000、自动换档或手动换档。
 c．标称误差
项    目 GCSTD-A
频率范围 20kHz～50MHz；
固有误差 ≤5％±满度值的2％；
工作误差 ≤7％±满度值的2％；
频率范围 10MHz～60MHz；
固有误差 ≤6％±满度值的2％；
工作误差 ≤8％±满度值的2％。
   2．电感测量范围：14.5nH~8.14H

3．电容测量：1~ 460
项    目 GCSTD-A
直接测量范围 1～460pF
主电容调节范围
准确度 30～500pF
150pF以下±1.5pF；
150pF以上±1％
   注：大于直接测量范围的电容测量见使用规则
   4．信号源频率覆盖范围
项     目 GCSTD-A
频率范围 10kHz～50MHz
频率分段
（虚拟） 10～99.9999kHz
100～999.999kHz
1～9.99999MHz
10～60MHz     
频率指示误差 3×10-5±1个字

   5．Q合格指示预置功能
      预置范围：5～1000。
   6．Q表正常工作条件
   a.  环境温度：0℃～+40℃；   
b．相对湿度：<80％；  
c．电源：220V±22V，50Hz±2.5Hz。
   7．其他
     a．消耗功率：约25W；  
b．净重：约7kg；  
c. 外型尺寸：（l×b×h）mm：380×132×280。
   8．产品配置：
a.测试主机一台；
b.电感9只；
c.夹具一套
   9、样品尺寸：直径为Φ50mm/Φ38mm  厚度为0.5-15MM

GCSTD-A
The dielectric constant and dielectric loss tester tester
Meet the standards: GBT 1409-2006 measurement of electrical insulating materials at power, audio, high-frequency (including wavelength, VHF)recommended methods of permittivity and dielectric loss factor
One, overview
The dielectric loss and dielectric constant is all kinds of porcelain,porcelain, ceramic capacitors and other devices, and composite materialsis an important physical properties, by measuring the dielectric loss tangentof Tan δ and Permittivity (epsilon), can further understand the factors influencing the dielectric loss and dielectric constant, and provide the basis for improve the properties of materials; the basic principle of instrument is using high frequency resonance method, and provides a general, impedance test, multi use, multi range. It uses single-chip computer as core control measuring instrument, using the frequency locking, frequency standard test point automatic setting, resonant point automatic search, Q value range automatic conversion, numerical display and other new technology, improved the tuning circuit, the tuning circuit for testing the residual inductance is reduced to the minimum, and retains the original Q table in the automatic amplitude stabilizer technology, makes the new instrument in the use of more convenient, more accurate measurement. Instrument in high frequency test conditions, measurement of high frequency inductor and resonant loop of the Q value, inductance and distributed capacitance of inductors, capacitance and loss tangent of dielectric loss, high frequency electrical materials, high frequency circuit in parallel and series resistance, the characteristic impedance of the transmission line
Research and application of scientific research institutions, schools,factories and other units of the new material properties of inorganic nonmetal for the instrument.
Technical indicators two, instrument
The measurement of 1.Q value
The a.Q value range: 2 ~ 1023.
The b.Q value range shift: 30, 100, 300, 1000, automatic or manual shift.
C. error
Item GCSTD-A
The frequency range of 20kHz to 50MHz;
The inherent error ≤ 5% ± full scale value 2%;
Work with error less than 7% ± full scale value 2%;
The frequency range of 10MHz to 60MHz;
The inherent error ≤ 6% ± full scale value 2%;
Work with error less than 8% ± full scale value 2%.
The 2 inductance measurement range: 14.5nH~8.14H
The 3 capacitance measurement: 1~ 460
Item GCSTD-A
Direct measurement of the range of 1 ~ 460pF
The main capacitor adjustment range
The accuracy of 30 ~ 500pF
The following 150pF + 1.5pF;
150pF or + 1%
Note: greater than direct measurement range of capacitance measurementsee using rules
Frequency of the 4 signal coverage
Item GCSTD-A
The frequency range of 10kHz to 50MHz
The frequency segment
(virtual) 10 ~ 99.9999kHz
100 - 999.999kHz
1 - 9.99999MHz
10 - 60MHz
Frequency indication error of 3 × 10-5 ± 1 words
5.Q conformity indicating preset function
The preset range: 5 ~ 1000.
Table 6.Q normal working conditions
A. environment temperature: 0 ℃ ~ +40 ℃;
Relative humidity: <80% b.;
C. power supply: 220V ± 22V, 50Hz ± 2.5Hz.
7 other
A. power consumption: about 25W;
B. net weight: about 7kg;
C. size: (L * b * h) mm:380 x 132 x 280.
8 the product configuration:
A. a test mainframe;
B. inductor 9;
A C. clamp
9, the sample size: diameter is phi 50mm/ Phi 38mm thickness of 0.5-15MM